Capping beam
Pile foundations are a type of deep foundation. They are formed by long, slender, columnar elements typically made from steel or reinforced concrete, or sometimes timber. A foundation is described as 'piled' when its depth is more than three times its breadth.
Pile foundations are principally used to transfer loads from superstructures, through weak, compressible strata or water onto stronger, more compact, less compressible and stiffer soil or rock at depth. They are typically used for large structures, and in situations where soil is not suitable to prevent excessive settlement.
Piles can be used individually to support loads or grouped and linked together with a reinforced concrete cap.
Pile caps can also be linked together with reinforced concrete to create a capping beam. At least three capped piles are needed to ensure stability against lateral forces (with the exception of caisson piles). Capping beams are also suitable for distributing the weight of a load-bearing wall, or of close-centred columns to a line of piles.
This differs from a ground beam which is provided between adjacent pile caps as a structural element to improve the stability of the foundation. For more information, see Ground beams.
Piles may be staggered along the beam to allow for any eccentricities that may occur in loaded conditions. If light loading is expected to result in only minor eccentricities, then the piles can be driven in a line beneath the capping beam’s centre.
The capping beam should be kept clear of the ground where the purpose of the piles is to overcome the problem of the subsoil swelling and shrinkage. This can be done by casting the capping beam on polystyrene or other compressive material, thereby allowing an upward ground movement without damage to the beam.
An economical construction method that can be adopted is to construct concrete block walls to the exact sizes of the cap. Having first backfilled the wall with soil the space can then be filled with concrete. This cuts down on the need for formwork and the extra excavation required to position it.
[edit] Find out more
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Preserving, waterproofing and decorating buildings.
Many resources for visitors aswell as new features for members.
Using technology to empower communities
The Community data platform; capturing the DNA of a place and fostering participation, for better design.
Heat pump and wind turbine sound calculations for PDRs
MCS publish updated sound calculation standards for permitted development installations.
Homes England creates largest housing-led site in the North
Successful, 34 hectare land acquisition with the residential allocation now completed.
Scottish apprenticeship training proposals
General support although better accountability and transparency is sought.
The history of building regulations
A story of belated action in response to crisis.
Moisture, fire safety and emerging trends in living walls
How wet is your wall?
Current policy explained and newly published consultation by the UK and Welsh Governments.
British architecture 1919–39. Book review.
Conservation of listed prefabs in Moseley.
Energy industry calls for urgent reform.
Heritage staff wellbeing at work survey.
A five minute introduction.
50th Golden anniversary ECA Edmundson apprentice award
Showcasing the very best electrotechnical and engineering services for half a century.
Welsh government consults on HRBs and reg changes
Seeking feedback on a new regulatory regime and a broad range of issues.